Overview of the InfoCenter Display (continued)
Service
Menu Item Description
Hours Lists the total number of hours that the machine,
engine and PTO have been on, as well as the
number of hours the machine has been
transported and service due.
Counts Lists numerous counts the machine has
experienced.
DPF Regeneration The diesel particulate filter regeneration option
and DPF submenus
Traction Pedal Calibrates the traction pedal.
Traction Pump Calibrates the traction pump.
Virtual Speed Sensor Calibrates the virtual speed sensor.
Diagnostics
Menu Item Description
Traction Indicates the inputs and outputs for the traction
pedal.
Cutting Units Indicates the inputs, qualifiers and outputs for
raising and lowering the cutting units.
PTO Indicates the inputs, qualifiers and outputs for
enabling the PTO circuit.
Engine Indicates the inputs, qualifiers and outputs for
starting the engine.
CAN Statistics Indicates the inputs and outputs for the CAN.
Settings
Menu Item Description
Enter PIN Allows a person (superintendent/mechanic)
authorized by your company with the PIN code
to access protected menus.
Backlight Controls the brightness of the LCD display.
Language Controls the language used on the display*.
Font Size Controls the size of the font on the display.
Units Controls the units used on the display (Imperial
or Metric).
Protect Settings Allows the ability to change the settings in the
protected settings.
Operation: Before Operation Page 5–8 3464-482 A
To Next Page
Loading...
