Understanding the Diesel-Particulate Filter and
Regeneration (continued)
3. At the REGEN PARAMETERS screen, verify that you have 1/4 tank of fuel if you are
performing the parked regeneration or 1/2 tank of fuel if you are performing the recovery
regeneration. Verify that the parking brake is engaged and the engine speed is set to
low idle. Press the select button to continue.
4. At the I
NITIATE DPF REGEN screen, select the next button to continue.
5. The InfoCenter displays the I
NITIATING DPF REGEN message.
Note: If needed, press the cancel icon to cancel the regeneration process.
6. The InfoCenter displays the time to complete message.
7. The InfoCenter displays the home screen and the regeneration acknowledge icon
appears .
Note: While the DPF regeneration runs, the InfoCenter displays the high exhaust-
temperature icon .
8. When the engine computer completes a parked or recovery regeneration, the
InfoCenter displays an advisory. Press any button to exit to the home screen.
Note: If the regeneration fails to complete, follow the advisory and press any button to
exit to the home screen.
Canceling a Parked or Recovery Regeneration
Use the PARKED REGEN CANCEL or RECOVERY REGEN CANCEL setting to cancel a running parked
or recovery regeneration process.
G483825s
1. Access the DPF Regeneration menu, scroll to
Parked Regen or Recovery Regen.
2. Press the select button to cancel a Parked
Regen or a Recovery Regen.
3464-482A Page 5–27 Operation: During Operation
To Next Page
Loading...
