Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the rst 100 hours
• Perform the breaking in a new machine guidelines.
Before each use or daily
• Inspect the seat belt(s) for wear , cuts, and other damage. Replace the seat belt(s) if
any component does not operate properly .
• Check the tire pressure.
• Check the brake-uid level.
• W ash the machine.
Every 100 hours
• Check the condition of the tires and rims.
• T orque the wheel-lug nuts.
• Inspect the steering and suspension for loose or damaged components.
• Check the front wheel camber and toe-in.
• Check the transaxle-uid level.
• Check the transaxle for leaks.
• Inspect the brakes.
Every 300 hours
• Grease the front wheel bearings.
Every 400 hours
• Replace the service and parking-brake pads.
Every 800 hours
• Change the transaxle uid.
Every 1,000 hours
• Change the brake uid.
Note: Download a free copy of the electrical schematic by visiting www .T oro.com and searching for your
machine from the Manuals link on the home page.
W ARNING
Failure to properly maintain the machine could result in premature failure of machine systems,
causing possible harm to you or bystanders.
Keep the machine well maintained and in good working order as indicated in these instructions.
31
To Next Page
Loading...
