Toro 07433LT - Raising and Lowering the Seat Assembly; Removing a Bucket Seat

g034045
Figure 31
2. Raise the hood.
Closing the Hood
1. Gently lower the hood.
2. Secure the hood by aligning the rubber latches
onto the latch anchors on each side of the hood
( Figure 31 ).
Raising and Lowering the
Seat Assembly
T o raise the seat assembly , push the seat assembly
forward until it rests on the steering wheel ( Figure 32 ).
T o lower the seat assembly , push the seat assembly
rearward until it seats back into the original position
( Figure 32 ).
g190066
Figure 32
Removing a Bucket Seat
1. Push the seat assembly forward to the raised
position ( Figure 32 ).
2. Slide the seat assembly to the side out of the
pins, and lift the seat assembly upward ( Figure
33 ).
g190187
Figure 33
1. Pins
34