Toro 08766 - Checking the Hydraulic Fluid

5
CheckingtheHydraulicFluid
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Stopthemachine,movethethrottlecontroltotheSlow
position,rotatetheignitionkeytoOff,andremovethe
keyfromtheswitchtopreventaccidentalstarting.
3.Cleantheareaaroundthehydraulicoil-reservoircapto
preventdebrisfromenteringthetank(Figure8).
Figure8
1.Oil-reservoircap
4.Removethecapfromthereservoir.
5.Removethedipstickfromllerneckandwipeitwith
acleanrag.
6.Insertthedipstickintothellerneck;thenremoveit
andchecktheleveloftheuid.
Note:Theuidlevelshouldbeuptothemark
(necked-downarea)onthedipstick(Figure9).
Figure9
1.Dipstick2.Fullmark
7.Iftheuidlevelislow,slowlyllthereservoirwiththe
appropriatehydraulicuiduntilthelevelreachesthe
necked-downareaonthedipstick.
Note:Donotoverll.
8.Installthereservoircap.
Note:Topreventsystemcontamination,cleanthetop
ofthehydraulicoilcontainersbeforepuncturingthem.
Ensurethatthepourspoutandthefunnelareclean.
9