11
Setup
Note: Determine the left and right sides of the machine from the normal operating position.
Loose Parts Chart
Note: Use this chart as a checklist to ensure all parts necessary for assembly have been shipped. If any of these parts are
missing, total setup cannot be completed.
Description
Qty. Use
Locknuts, 1/2–20
Cable guide
Capscrews, 5/16 x 1/2 in.
3
1
2
Install the handle to the fork
Hood plate
Pop rivet
Capscrew, #10–24 x 2 in.
Nut, #10–24
Locknut, #10–24
1
3
1
1
1
Secure rear hood for CE
Capscrew, 1/4–20 x 1 in.
Locknut, 1/4–20
1
1
Secure jackshaft hood for CE
Carriage bolt, 5/16 x 3/4 in.
Flange nut, 5/16
2
2
Secure battery cables to battery posts
Ignition key 2
Carriage screw, 3/8 x 1.25 in.
Flat washer, 3/8
Flange nut, 3/8
12
12
12
Secure turf guards
Declaration of conformity
Operator’s manual 2 Read before operating the machine.
Engine operator’s manual 1 Read before operating the machine.
Parts catalog 1
Operator video 1 View before operating the machine
Pre–delivery check list 1
Note: Specifications and design subject to change without notice.
To Next Page
Loading...
