Toro 20192 - Setup; Unfolding the Handle; Filling the Engine with Oil; Installing Mulch Plug or Grass Bag

Setup
1.UnfoldingtheHandle
Procedure
1.Movethehandlerearwardandholdtheupperhandle
inplace(Figure3).
Figure3
Note:Thehandlewillclickintoposition.
2.Tightentheupperhandleknobastightasyoucan
(Figure4).
Figure4
2.FillingtheEnginewithOil
0.58
quart
(0.55l)
SAE30detergentoilwithanAPIserviceclassication
ofSH,SJ,SL,orhigher(notsuppliedwiththemower).
Procedure
Important:Yourmower
does not comewithoil
intheengine.
1.Removethedipstick(Figure5).
Figure5
2.Slowlypouroilintotheoillltube,periodically
checkingthelevelwiththedipstick,untilthedipstick
indicatesthattheengineisfullasillustratedin
Figure5.Donotoverll.(Max.ll:0.58quart(0.55
l),type:SAE30detergentoilwithanAPIservice
classicationofSH,SJ,SL,orhigher.)
Note:Ifyouoverlltheengine,poursomeoilout
ofitasdirectedinChangingtheEngineOil.
3.Installthedipsticksecurely.
Important:
Change the engine oil after the r st
5 operating hour s ;changeityearlythereafter.
RefertoChangingtheEngineOil.
3.InstalltheMulchPlugor
GrassBag
Procedure
Youmustcorrectlyinstallthemulchplug(formulching
orside-discharging)orgrassbag(forbagging)orthe
enginewillnotstart.
Themowerhasasafetyswitch,locatedatthebottom
ofachannelonthetop,rightrearofthemower,that
preventsthemowerfromoperatingwithoutamulch
plugorgrassbag.Thispreventsthemowerfrom
throwingdebrisattheoperatorthroughtherearchute.
5