Toro 25500 - Checking the Coolant Level in the Reservoir; Checking the Hydraulic-Fluid Level

CheckingtheCoolantLevelin
theReservoir
ServiceInterval:Beforeeachuseordaily
Iftheengineoverheatwarningisdisplayedonthecontrol
panel,checkthecoolantlevelinthereservoirandaddcoolant
ifitislow .Alsoinspecttheenginecompartmentaroundthe
radiatorandclearawayanyobstructionstoairow.
1.Parkthemachineonalevelsurface,stoptheengine,
andremovetheignitionkey.
2.Allowtheenginetocool.
3.Removetheleftsidepanel;refertoRemovingtheSide
Panels(page44).
4.Checkthecoolantlevelinthereservoir(Figure26).
2
1
g024979
Figure26
1.Reservoir
2.Coolantlevel(halfway
betweentheAddandFull
marks)
Note:Ensurethatthecoolantlevelisbetween1/4
and3/4ofthewayupinthesightglass(Figure26).
5.Addthespeciedcoolantuntilthecoolantlevelis
between1/4and3/4ofthewayupinthesightglass.
Note:Ensurethatthecoolantsolutionisthoroughly
mixedbeforellingthereservoir.
6.Installtheleftsidepanel;refertoInstallingtheSide
Panels(page45).
CheckingtheHydraulic-Fluid
Level
ServiceInterval:Beforeeachuseordaily
Hydraulicuidspecication:Mobiluid424
Note:Manybrandsofhydraulicuidarealmostcolorless,
makingitdifculttodetectleaks.Areddyeadditiveforthe
hydraulicsystemoilisavailablein20ml(0.68oz)bottles.
Onebottleissufcientfor15.1to22.7L(4.0to6.0US
gal)ofhydraulicuid;youcanorderthisadditivefroman
AuthorizedToroServiceDealer.
1.Parkthemachineonalevelsurface,andputallthe
attachmentsinthetransportposition.
2.Stoptheengine,settheparkingbrake,andremovethe
ignitionkey.
3.Checkthehydraulic-uidlevelinthesightglasslocated
atthesideofthehydraulicreservoir(Figure27).
Figure27
1.Fillcap(off)3.Hydraulicuidlevelatthe
midpointofthesightglass
2.Hydraulicuid
Note:Thehydraulic-uidlevelshouldbebetweenthe
bottomandmidpointofthesightglass.
4.Ifthehydraulic-uidlevelisnotvisibleinthesight
glass,removethellcap(Figure27),addthespecied
hydraulicuiduntiltheuidlevelisatthemidpointof
thesightglass,andinstallthellcap.
25