Toro 25500 - Servicing the Axles

Figure82
B.Torqueallthenutsto200N-m(150ft-lb)inthe
sequenceshowninFigure82.
C.Torqueallthenutsto300N-m(225ft-lb)inthe
sequenceshowninFigure82.
ServicingtheAxles
Hub-and-axleoilspecication:Mobiluid424
CheckingtheOilLevelintheWheel
Hubs
ServiceInterval:Aftertherst100hours
Every250hours
Note:Haveanotherpersonhelpyoualigntheoilplugsin
theaxleswhenyouservicetheaxleoil.
1.Ensurethatthemachineisonalevelsurfaceandthat
alltheattachmentsareinthetransportposition.
2.Movethemachineforwardorbackwarduntiltheplug
forthewheelhubisateitherthe3o’clockor9o’clock
position(Figure83).
Figure83
1.Wheelhub4.Drainpan
2.Oilportatthe9o’clock
position
5.Oilportatthe3o’clock
position(alternative)
3.Plug
3.Stoptheengine,settheparkingbrake,andremovethe
ignitionkey.
4.Placeadrainpanunderthedrainportinthewheelhub
(Figure83).
5.Removetheplugfromthewheelhub(Figure83).
6.Checkthattheoillevelisatthebottomofthethreads
oftheoilport(Figure83).
•Iftheoillevelistoohigh,allowtheoiltodrain
fromtheoilport.
•Iftheoillevelistoolow,addthespeciedoiltothe
wheelhubthroughtheoilport;refertostep6in
ChangingtheOilintheWheelHubs(page57).
7.ChecktheconditionoftheO-ringontheplug.
Note:ReplacetheO-ringifitiswornordamaged.
8.Installtheplugintheoilportofthewheelhub(Figure
83).
9.Repeatsteps2through8fortheotherwheelhubs.
56