Toro 25500 - Disconnecting the Alternator Wiring; Disconnecting the Computer-Module Connectors; Connecting the Computer-Module Connectors

DisconnectingtheAlternator
Wiring
1.Atthealternator,slidethebootofftheterminaland
studatthebackofthealternator(Figure116).
Figure116
1.Chargewire
3.4-socketconnector
(voltage-sensewire)
2.Boot
2.Removethenutandwasherthatsecurestheterminal
ofthechargewiretothestudofthealternator,and
removetheterminal.
3.Removethe4-socketconnectorforthevoltage-sense
wirefromthe4-pinconnectorontopofthealternator
(Figure116).
Disconnectingthe
Computer-moduleConnectors
1.Removethe4hex-angedheadbolts(6x20mm)that
securethelower-consolepaneltotheconsole,and
removethepanel(Figure117).
Figure117
1.Lower-consolepanel
2.Hex-angedheadbolts(6
x20mm)
2.Disconnectthe50-socketconnector(CPU1)fromthe
backofthecomputermodule(Figure118).
Figure118
1.Forward
3.Computermodule
2.50-socketconnector(CPU
1)
4.38-socketconnector
(CPU-2)
3.Disconnectthe38-socketconnector(CPU-2)fromthe
backofthecomputermodule(Figure118).
Connectingthe
Computer-moduleConnectors
1.Connectthe38-socketconnector(CPU-2)totheback
ofthecomputermodule(Figure118).
2.Connectthe50-socketconnector(CPU1)totheback
ofthecomputermodule(Figure118).
74