Toro 30635 - Pushing or Towing the Machine; Locating the Jacking Points; Hauling the Machine

PushingorTowingthe
Machine
Inanemergency,youcanmovethemachine
forwardbyactuatingthebypassvalveinthe
variable-displacementhydraulicpumpandpushingor
towingthemachine.
Important:Donotpushortowthemachinefaster
than3to4.8km/h(2to3mph)Ifyoupushortow
atafasterspeed,internaltransmissiondamage
mayoccur.
Thebypassvalvesmustbeopenwheneveryou
pushortowthemachine.
1.Raisetheseatandlocatethebypassvalves,
whicharelocatedbelowthefrontofthefueltank
(Figure39).
g221674
Figure39
1.Bypassvalve(2)
2.Rotateeachvalve3counter-clockwiseturnsto
openandallowtheuidtobypassinternally.
Note:Donotopenmorethan3turns.Because
theuidisbypassed,themachinecanbeslowly
movedwithoutdamagingthetransmission.
3.Pushortowthemachine.
4.Finishpushingortowingthemachineandclose
thebypassvalves.T orquethevalveto70N∙m
(52ft-lb).
Important:Ensurethatthebypassvalveis
closedbeforeyoustarttheengine.Running
theenginewithanopenbypassvalvecauses
thetransmissiontooverheat.
Important:Ifyoumustpushortowthemachine
inreverse,bypassthecheckvalveinthe4-wheel
drivemanifold.
Tobypassthecheckvalve,connectahose
assemblytothereversetractionpressuretestport
(locatedonthehydrostat)andontheportlocated
betweenportsM8andP2onthereartraction
manifold(locatedbehindthefronttire).Thehose
assemblyincludes1hose(PartNo.95-8843),2
couplerttings(PartNo.95-0985),and2hydraulic
ttings(PartNo.340-77).
LocatingtheJackingPoints
DANGER
Mechanicalorhydraulicjacksmayfailto
supportmachineandcauseaseriousinjury.
•Usejackstandswhensupportingthe
machine.
•Donotusehydraulicjacks.
Therearejackingpointslocatedatthefrontandrear
ofthemachine.
•Ontheframeattheinsideofeachfrontdrivetire
•Atthecenteroftherearaxle
HaulingtheMachine
•Removethekeyandshutoffthefuel(ifequipped)
beforestoringorhaulingthemachine.
•Usecarewhenloadingorunloadingthemachine
intoatraileroratruck.
•Usefull-widthrampsforloadingthemachineinto
atraileroratruck.
•Tiethemachinedownsecurely.
42