Toro 31051 - Page 77

InstallingtheHydraulicHosesandTubes(continued)
4.Ifatorquewrenchisnotavailableorifspaceattheswivelnutpreventsthe
useofatorquewrench,usethealternativeprocedureFlatsFromWrench
Resistance(FFWR)givenbelow:
FlatsFromWrenchResistanceTable
Size
FFWR
3/8BSPP1/2to3/4
6ORFS1/2to3/4
8ORFS1/2to3/4
10ORFS1/2to3/4
12ORFS1/3to1/2
16ORFS1/3to1/2
A.Useawrenchtotightentheswivelnutontothettinguntilyoufeellight
resistancewiththewrench-approximately3.39N∙m(30in-lb).
B.Putamarkontheswivelnutandbodyofthetting.Holdthehose/tubein
alignmentwithawrenchtopreventthehose/tubefromturning(Figure25).
g221222
Figure25
1.Marknutandttingbody
3.Initialposition
2.Finalposition4.Extendline
Note:Themarkingsonthenutandbodyofthettingshowthatthe
connectioniscorrectlytightened.
C.UseasecondwrenchtotightenthenuttothecorrectFlatsFromWrench
Resistance(FFWR);refertotheFlatsFromWrenchResistanceT able
(page5–9).
ProLineH800
Page5–9
HydraulicSystem:GeneralInformation
19241SLRevB