Toro 41188 - Pre-Maintenance Procedures; Raising the Sprayer; Lubrication; Greasing the Machine

Pre-Maintenance
Procedures
RaisingtheSprayer
Whenevertheengineisrunforroutinemaintenance
and/orenginediagnostics,therearwheelsofthe
sprayershouldbe2.5cm(1inch)offthegroundwith
therearaxlesupportedonjackstands.
DANGER
Asprayeronajackmaybeunstableandslip
offthejack,injuringanyonebeneathit.
•Donotstarttheenginewhilethesprayer
isonajack.
•Alwaysremovethekeyfromtheignition
beforegettingoffthesprayer.
•Blockthetireswhenthesprayerisona
jack.
Thejackingpointatthefrontofthesprayerisunder
thefrontcrossbar(Figure30A).Thejackingpointat
therearofthesprayerisontherearframesupport,
behindthereartie-downloops(Figure30B).
g028108
Figure30
1.Frontjackingpoint2.Reartie-downloops
Lubrication
GreasingtheMachine
ServiceInterval:Every100hours/Yearly(whichever
comesrst)—Lubricateallgrease
ttings.
GreaseType:No.2lithiumgrease
ReferFigure31forthegrease-pointlocations.
g216476
Figure31
1.Wipethegreasettingcleansothatyoudonot
forcedirtordebrisintothebearingorbushing.
2.Pumpgreaseintothebearingorbushing.
3.Wipeofftheexcessgrease.
GreasingtheSprayerPump
ServiceInterval:Every50hours—Lubricatethe
pump.
GreaseType:MobilXHP461
1.Raisethesprayer;refertoRaisingtheSprayer
(page40).
2.Locatethesprayerpump.
Note:Thepumpislocatedbelowtheseat;refer
toLocatingtheSprayPump(page33).
3.Wipethe2remotegreasettingsclean(Figure
32AandFigure32B).
40