20
Familiarize yourself with the controls and
recommended operating procedures before
operating the MULTI PRO
®
5500.
THROTTLE CONTROL: (Fig. 18) Move control
forward, toward "FAST", to increase engine speed,
rearward, toward "SLOW", to decrease engine
speed. Set at 1/4 to 1/3 throttle when starting
engine.
MANUAL CHOKE: (Fig. 18) Pull OUT when
starting cold engine, gradually push IN after
successfully starting engine.
Figure 18
1. Throttle control 2. Manual Choke
VEHICLE CONTROLS
TRACTION PEDAL: (Fig. 17) Controls forward
and reverse operation. Depress top of pedal to
move forward and bottom of pedal to move
backward. Ground speed depends on how far
pedal is depressed. For maximum ground speed,
fully depress pedal while throttle is in FAST.
To stop, reduce foot pressure on traction pedal
and allow it to return to center position.
EMERGENCY/PARKING BRAKE PEDAL:
(Fig. 17) Functions as a parking brake and an
emergency brake in situations demanding an
immediate stop.
BRAKE LOCK: (Fig. 17) The small pedal to the
left side of the brake pedal actuates the parking
brake lock. To engage parking brake, fully depress
brake pedal and depress brake lock which locks
brake pedal. To release parking brake, fully
depress brake pedal to release brake lock.
REMOTE BOOM ON/OFF SWITCH: (Fig. 17) Is
in series with the MASTER BOOM ON/OFF switch;
The operator must first turn on the Master Boom
ON/OFF switch on the center console; then click
on the Remote Boom ON/OFF Switch on the floor
board.
1. Traction Pedal 3. Brake Lock
2. Brake Pedal 4. Remote Master Switch
Figure 17
!
"
To Next Page
Loading...
