45
SPRAYING SYSTEM:
C. Keep spray material from skin. If spray
material comes in contact with body, wash it
off immediately with clean water and
detergent.
D. Always wear goggles and other protective
equipment as recommended by the Chemical
Manufacturer.
E. Properly dispose of chemical container
and unused chemicals.
A. Select the proper chemical for the job.
B. Carefully read the directions printed on the
chemical manufacturer's labels before
handling chemicals. Instructions on chemical
manufacturer's container labels, regarding
mixing proportions, should be read and strictly
followed.
1. Learn how to operate the Sprayer and how to
use the controls properly. DO NOT let anyone
operate this equipment without first receiving
thorough instructions.
2. Keep all shields, safety devices, and decals in
place. If a shield, safety device or decal is
malfunctioning, illegible or damaged, repair or
replace it before operating the machine.
3. Chemicals can injure persons, animals, plants,
soils or other property. To eliminate environmental
damage and personal injury:
The MULTI PRO
®
5500 Turf Sprayer is primarily
a dedicated spray application vehicle with optional
material hauling and spreading capabilities.
Equipped with a flow-regulating hydraulic Control
Valve, the Spray System pressure is adjusted as
the Spray Pump speed is increased or decreased.
The system includes manual controls located on
the operator's Center Console, a remote Boom
Control Switch located on the operator's-side
floorboard, and Boom Indicator Lights on the
dash. The Spray System itself consists of a 300
gallon tank, hydraulic flow regulator, spray pump,
and three Boom sections for even application of
material. This unit is specially designed to improve
the accuracy and uniformity of spray applications.
MAINTENANCE:
4. Before servicing or making any adjustments
to the Sprayer:
A. Stop the vehicle and set the parking
brake.
B. Shut off the vehicle's engine and remove
the key from ignition.
C. Disengage all power and wait until all
moving parts have stopped.
5. Keep all nuts, bolts, and other fasteners
tightened securely. Replace any shields removed
during servicing or adjustments.
6. To be sure of optimum performance and safety,
always purchase genuine TORO replacement
parts. Accessories made by other manufacturer's
could be dangerous. Altering this equipment in
any other manner may affect the machine's
operation, performance, and durability, or its use
may result in injury or death. Such use could void
the product warranty of The Toro Company.
To Next Page
Loading...
