50
BEFORE SPRAYING
FILL FRESH WATER WASH TANK (Fig. 45)
In case of chemical contact with skin or eyes,
refer to the Chemical Manufacturer's label for
instructions on seeking medical attention. A
fresh water wash tank has been installed on
the right side of the vehicle.
NOTE: Fill Fresh Water Wash Tank with clean
water only. Check to assure tank is full before
each operation.
Figure 45
1. Fresh Water Tank 2. Spigot
1. Turn Tank Spigot to "ON" position.
2. Hold contaminated area directly under water
stream. Flush thoroughly.
3. Turn Tank Spigot to "OFF" position.
1123
To Next Page
Loading...
