Toro 72932 - Greasing the Caster Pivots

Note:Keepthedustcapoffuntilgreasingis
done.
6.Removethehexplug.
7.Threadagreasettingintothehole.
8.Pumpgreaseintothettinguntilitoozesout
aroundthetopbearing.
9.Removethegreasettinginthehole.
10.Installthehexpluganddustcap(Figure46).
g027339
Figure46
11.Greasethecaster-wheelbearings(Figure46).
GreasingtheCasterPivots
ServiceInterval:Every400hours/Yearly(whichever
comesrst)(moreoftenindirtyor
dustyconditions).
Yearly—Repackthecaster-wheelbearings
(moreoftenindirtyordustyconditions).
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch,andengagetheparking
brake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Removethedustcapandadjustthecaster
pivotsandkeepthedustcapoffuntilgreasingis
done;refertoGreasingtheMachine(page38).
4.Removethehexplug.
5.Threadagreasettingintothehole.
6.Pumpgreaseintothettinguntilitoozesout
aroundthetopbearing.
7.Removethegreasettingfromthehole.Install
thehexplugandcap.
39