Toro 74267 - Drive System Maintenance; Adjusting the Tracking

g012492
Figure63
1.Ignition—30A(F1)3.Clutch—10A(F3)
2.Radiatorfan—50A(large,
heavydutyfuse)
4.Leftfueltank
DriveSystem
Maintenance
AdjustingtheTracking
Themachinehasaknobforadjustingthetracking
locatedundertheseat.
Important:Adjustthehandleneutraland
hydraulicpumpneutralbeforeadjustingthe
tracking;refertoAdjustingtheControlHandle
NeutralPosition(page60)andSettingthe
HydraulicPumpNeutralPosition(page65).
1.Pushbothcontrolleversforwardthesame
distance.
2.Checkifthemachinepullsto1side.Ifitdoes,
shutoffthemachineandengagetheparking
brake.
3.Unlatchtheseatandtilttheseatforwardto
accessthetrackingknob.
Note:Determinetheleftandrightsidesofthe
machinefromthenormaloperatingposition.
4.Tomakethemachinegoright,turntheknob
towardtherightofthemachine;refertoFigure
64.
5.Tomakethemachinegoleft,turntheknob
towardtheleftofthemachine;refertoFigure64.
6.Repeatadjustmentuntilthetrackingiscorrect.
49