Toro 74274 - Page 11

64 pages

To Next Page

To Previous Page

Manufacturer’sMark

1.Indicatesthebladeisidentiedasapartfromtheoriginal

machinemanufacturer.

110–0806

110–3842

112-8319

106-7492

Main Page

Side Discharge1
Table of Contents2
Introduction2
Safety4
- Safe Operating Practices4
  - Slope Operation5
  - Maintenance and Storage5
- Slope Chart6
- Safety and Instructional Decals7
Product Overview13
- Controls13
Operation14
- Adding Fuel14
- Checking the Engine Oil Level15
- Switching the Fuel Tanks15
- Using the Rollover Protection System (ROPS)16
- Think Safety First17
- Operating the Parking Brake18
- Starting and Stopping the Engine18
- Starting the Engine in Cold Weather19
- Operating the Power Take off (PTO)20
- The Safety Interlock System20
- Driving Forward or Backward21
- Stopping the Machine22
- Adjusting the Height-Of-Cut22
- Adjusting the Anti-Scalp Rollers22
- Adjusting the Flow Baffle23
- Positioning the Flow Baffle24
- Positioning the Seat24
- Unlatching the Seat25
- Pushing the Machine by Hand25
- Using the Side Discharge25
- Transporting Machines26
- Loading Machines26
- Operating Tips27
Maintenance29
Recommended Maintenance Schedule(S)29
Lubrication30
- Greasing and Lubrication30
- Greasing the Mower Deck and Belt Idlers30
Engine Maintenance31
- Servicing the Air Cleaner31
- Servicing the Engine Oil32
  - Changing the Engine Oil33
  - Changing the Engine Oil Filter35
Fuel System Maintenance36
- Servicing the Fuel Filters36
- Servicing the Fuel Tank36
Electrical System Maintenance36
- Servicing the Battery36
  - Installing the Battery37
  - Charging the Battery37
- Servicing the Fuses38
Drive System Maintenance39
- Adjusting the Tracking39
- Checking the Tire Pressure39
- Checking the Wheel Hub Slotted Nut40
- Adjusting the Caster Pivot Bearing40
- Servicing the Gear Box40
Cooling System Maintenance41
- Servicing the Cooling System41
- Radiator Screen42
Brake Maintenance43
- Adjusting the Parking Brake43
Belt Maintenance43
- Inspecting the Belts43
- Replacing the Mower Belt43
- Adjusting the Mower Belt Tension44
- Replacing the PTO Drive Belt45
- Replacing the Pump Drive Belt45
- Replacing and Tensioning the Alternator Belt46
Controls System Maintenance47
- Adjusting the Control Handle Neutral Position47
- Hydraulic System Maintenance48
  - Servicing the Hydraulic System48
  - Setting the Hydraulic Pump Neutral Position50
- Mower Deck Maintenance52
- Cleaning57
  - Cleaning under the Mower57
  - Waste Disposal57
Storage57
- Cleaning and Storage57
Troubleshooting59
Schematics61

Toro 74274 - Page 11

Table of Contents

Related product manuals