Toro 74538 - Page 56

Figure86
1.MeasurebladeatpointsA
andB
2.Measurefromalevel
surface
ChangingtheMowerDeck
Front-to-RearPitch
Changingthefront-to-rearpitchisdonebyadjustingthe
frontheight-of-cutposts.
1.Place3piecesof2x4woodunderthemowerdeck
asshowninFigure87.Standthe2x4’sonthe4inch
part.
G015245
Figure87
1.2x4pieceofwoodundermowerdeck
2.For48and52inchmowerdecks,loosenboth
thefrontandrearnutsontheadjustmentrods
(Figure88).
3.For60inchmowerdecks,loosenboththefront
andrearnutsandliftlinksontheadjustmentrods
(Figure89).
4.Theweightofthemowerdeckmustberestingonall
threeofthe2x4’s(Figure88).Thebacklipofthe
mowerdeckisbuilta1/4inch(6mm)lowerthanthe
frontlipofthemowerdeck.
5.For60inchmowerdecks,tightentheliftlinks
(
Figure89).
6.Tightenboththefrontandrearnuts.
7.Checkthefront-to-rearpitchofthecuttingunit.
8.Ifthedimensionsarenotcorrect,adjustthefront
andrearnutsoneithersidetogetthecorrect
front-to-rearpitch(
Figure88).
G015246
Figure88
48and52inchmowerdecks
1.Adjustmentrods3.Frontnuts
2.Rearnuts
56