Toro 74760 - Seat Access and Bearing Greasing

Pre-Maintenance
Procedures
RaisingtheSeat
Makesurethemotion-controlleversarelockedinthe
PARKposition.Lifttheseatforward.
Thefollowingcomponentscanbeaccessedbyraising
theseat:
•Serialplate
•Servicedecal
•Seatadjustmentbolts
•Fuellter
•Batteryandbatterycables
Lubrication
GreasingtheBearings
ServiceInterval:Every25hours—Greaseall
lubricationpoints.
GreaseType:No.2general-purposelithium-based
grease
1.Parkthemachineonalevelsurfaceand
disengagetheblade-controlswitch.
2.Movethemotion-controlleversoutwardtothe
PARKposition,stoptheengine,removethe
key,andwaitforallmovingpartstostopbefore
leavingtheoperatingposition.
3.Cleanthegreasettings(Figure27andFigure
28)witharag.Makesuretoscrapeanypaintoff
ofthefrontofthetting(s).
g014522
Figure27
1.Frontcastertire
decal106-8717
Figure28
Locatedontheseatpanunderside
1.Readtheinstructions
beforeservicingor
performingmaintenance.
3.Greaseevery25operating
hours.
2.Checktirepressureevery
25operatinghours.
4.Engine
4.Connectagreaseguntoeachtting(Figure27
andFigure28).Pumpgreaseintothettings
untilgreasebeginstooozeoutofthebearings.
31