What to do if my Toro 74765 Lawn Mower has an abnormal vibration?
If your Toro Lawn Mower is vibrating excessively, check the following: Tighten any loose engine-mounting bolts. Ensure the engine pulley, idler pulley, or blade pulley is tightened appropriately. If the cutting blade(s) is bent or unbalanced, install a new cutting blade(s). Also, tighten any loose blade-mounting bolts.
What to do if the Toro 74765 engine overheats?
If the engine on your Toro Lawn Mower is overheating, there are several possible causes. First, the engine load might be excessive, so reduce the ground speed. Second, the oil level in the crankcase may be low, so add oil. Third, the cooling fins and air passages under the engine blower housing could be plugged; remove any obstructions. Fourth, the air cleaner may be dirty; clean or replace the air cleaner element.
What to do if the starter does not crank on my Toro Lawn Mower?
If the starter on your Toro Lawn Mower doesn't crank, check the following: - Ensure the blade control switch is disengaged. - Ensure the motion-control levers are in the PARK position. - Check if the battery is dead and charge it if necessary. - Inspect electrical connections for corrosion or looseness, and correct as needed. - Replace the fuse if it is blown.
General| Model | 74765 |
|---|---|
| Power Source | Gasoline |
| Deck Type | Fabricated |
| Number of Blades | 3 |
| Drive System | Hydrostatic |
| Self-propelled | Yes |
| Engine | Kohler |
| Deck Material | Steel |
| Seat | High-back |
| Mulching Capability | Yes |
| Type | Riding Lawn Mower |
To Next Page
