Toro 74919TE User Manual

72 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

FormNo.3400-138RevA

ZMaster

®

Professional6000

SeriesRidingMower

with132cmor152cmTURBOFORCE

®

Side

DischargeMower

ModelNo.74919TE—SerialNo.316000001andUp

ModelNo.74925TE—SerialNo.316000001andUp

g027403

Registeratwww.Toro.com.

OriginalInstructions(EN)

*3400-138*A

Table of Contents

Questions and Answers:

D
Daniel HernandezSep 2, 2025
What causes the blades on my Toro 74919TE not to rotate?
- B
  Brian ParsonsSep 2, 2025
  If the blades on your Toro Lawn Mower aren't rotating, check these potential causes: * The mower deck belt might be worn, loose, or broken; install a new deck belt. * The mower deck belt could be off the pulley; install the mower deck pulley and check the idler pulley, idler arm, and spring for correct position and function. * The pump drive belt might be worn, loose, or broken; check the belt tension or install a new belt. * A broken or missing idler spring can also cause this issue; replace the spring.
W
William WilliamsSep 2, 2025
What to do if Toro Lawn Mower produces an uneven cutting height?
- J
  John GrahamSep 2, 2025
  If your Toro Lawn Mower is producing an uneven cutting height, consider these potential causes: 1. The blades might not be sharp enough, so sharpen them. 2. The cutting blades could be bent, in which case you should install new ones. 3. The mower deck may not be level; level it from side-to-side and front-to-rear. 4. The underside of the mower might be dirty, so clean it. 5. Check and adjust the tire pressure to the correct levels. If the blade spindle is bent, contact an Authorized Service Dealer.
A
alexander68Sep 2, 2025
What to do if my Toro 74919TE Lawn Mower won't drive?
- C
  Christopher MorenoSep 2, 2025
  If your Toro Lawn Mower isn't driving, check if the bypass valves are not closed tight and tighten them. Also, the pump belt could be worn, loose, or broken, or off a pulley, in which case change the belt. The idler spring might be broken or missing, so replace the spring. The hydraulic-fluid level might be low or too hot, so add hydraulic fluid to reservoirs or let it cool down.
D
debra61Sep 2, 2025
How to troubleshoot uneven cutting height on my Toro 74919TE Lawn Mower?
- M
  misty36Sep 2, 2025
  An uneven cutting height on your Toro Lawn Mower could be due to several factors. The blade(s) might not be sharp, so sharpen them. Alternatively, the cutting blade(s) could be bent, so install new cutting blade(s). The mower deck might not be level, so level the mower deck from side-to-side and front-to-rear. The underside of the mower could be dirty, so clean it. Also, the tire pressure might not be correct, so adjust it.
D
David CarrSep 1, 2025
Why aren't the blades rotating on my Toro 74919TE?
- S
  Scott MoranSep 1, 2025
  If the blades on your Toro Lawn Mower aren't rotating, check for a damaged, worn, loose, or broken mower deck belt and install a new deck belt if needed. If the mower deck belt is off the pulley, install it back on the deck pulley and check the idler pulley, idler arm, and spring for correct position and function. Inspect the pump drive belt for wear, looseness, or breakage; check the belt tension or install a new belt. Replace the idler spring if it is broken or missing.
D
Douglas BaileySep 1, 2025
How to fix uneven cutting height on my Toro 74919TE Lawn Mower?
- G
  Gregory DeanSep 1, 2025
  If the cutting height is uneven on your Toro Lawn Mower, consider these possibilities: * Sharpen the blade(s) if they are not sharp. * Install a new cutting blade(s) if the current ones are bent. * Level the mower from side-to-side and front-to-rear. * Adjust the anti-scalp wheel height if an anti-scalp roller (if applicable) is not set correctly. * Clean the underside of the mower deck if it is dirty. * Adjust the tire pressure if it is incorrect.
C
Charles RasmussenSep 1, 2025
How to fix a starter that won't crank on my Toro 74919TE Lawn Mower?
- T
  timothy63Sep 1, 2025
  If the starter on your Toro Lawn Mower won't crank, check these items: * Ensure the blade-control switch is disengaged. * Engage the parking brake. * Move the motion-control levers to the NEUTRAL-LOCK position. * Make sure you are sitting in the operator’s seat. * Charge the battery if it's dead. * Check the electrical connections for good contact. * Replace the fuse if it's blown.
C
Crystal RiddleSep 1, 2025
Why does my Toro 74919TE Lawn Mower have an uneven cutting height?
- C
  chadhodgeSep 1, 2025
  An uneven cutting height on your Toro lawn mower can result from: - Dull blades: Sharpen the blade(s). - Bent cutting blades: Install new cutting blade(s). - Unlevel mower deck: Level mower deck from side-to-side and front-to-rear. - Dirty mower underside: Clean the underside of the mower. - Incorrect tire pressure: Adjust the tire pressure.
S
Shannon WardAug 31, 2025
How to fix Toro 74919TE engine when it loses power?
- F
  Faith AdamsSep 1, 2025
  If your Toro lawn mower engine loses power, try reducing the ground speed, as the engine load may be excessive. Check and clean the air cleaner element if it's dirty. Ensure the oil level in the crankcase is sufficient. Clear any obstructions from the cooling fins and air passages above the engine. Also, inspect the fuel cap vent hole and clean or replace the fuel cap if it's plugged, and replace the fuel filter if it is dirty.
K
kmirandaAug 31, 2025
What to do if my Toro 74919TE Lawn Mower will not drive?
- B
  brittany15Aug 31, 2025
  If your Toro Lawn Mower won't drive, consider the following: * Tighten the by pass valves. * Change the belt. * Replace the spring. * Add hydraulic oil to reservoirs or let it cool down.

Toro 74919TE Specifications

General

Brand	Toro
Model	74919TE
Category	Lawn Mower
Language	English

Related product manuals

Preview: Toro 74915

Toro Z Master 74915

Preview: Toro 74915 Z Master G3

Toro 74915 Z Master G3

Preview: Toro 74950

Preview: Toro 74952