What to do if my Toro Lawn Mower blades do not rotate?
If the blades on your Toro Lawn Mower do not rotate, try these solutions: * Install a new deck belt. * Install the mower deck pulley and check the idler pulley, idler arm, and spring for correct position and function. * Check the belt tension or install a new belt. * Replace the spring.
What to do if my Toro 74919TE Lawn Mower is resulting in uneven cutting height?
If mowing with your Toro Lawn Mower results in an uneven cutting height, try the following: * Sharpen the blade(s). * Install new cutting blade(s). * Level the mower deck from side-to-side and front-to-rear. * Clean the underside of the mower. * Adjust the tire pressure.
Why is my Toro 74919TE resulting in uneven cutting height?
If your Toro Lawn Mower is mowing with an uneven cutting height, several factors could be responsible. Ensure the blades are sharp; if not, sharpen them. Bent cutting blades can also cause this, so install new ones. Check if the mower deck is level from side-to-side and front-to-rear, and adjust as needed. A dirty underside of the mower can interfere with cutting, so clean it. Also, verify that the tire pressure is correct. For a bent blade spindle, contact an Authorized Service Dealer.
Why does my Toro Lawn Mower not drive?
General| Brand | Toro |
|---|---|
| Model | 74919TE |
| Category | Lawn Mower |
| Language | English |
To Next Page
