Toro 74955 - Driving Backward; Stopping the Machine; Adjusting the Height of Cut; Using the Transport Lock

G008952
Figure22
DrivingBackward
1.Movetheleverstothecenter,unlockedposition.
2.Togobackward,slowlypullthemotioncontrollevers
rearward(Figure23).
G008953
Figure23
StoppingtheMachine
Tostopthemachine,movethetractioncontrolleversto
neutralandmovetolockedposition,disengagethepower
takeoff(bladecontrolswitch(PTO),andturntheignition
keytotheoffposition.
Settheparkingbrakewhenyouleavethemachine;referto
SettingtheParkingBrake(page18).Removethekeyfrom
theignitionswitch.
CAUTION
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemachinewhileitis
unattended.
Alwaysremovetheignitionkeyandsettheparking
brakewhenleavingthemachineunattended,even
ifjustforafewminutes.
AdjustingtheHeightofCut
UsingtheTransportLock
Thetransportlockhas2positionsandisusedwiththe
deck-liftpedal.Thereisalockpositionandaunlockposition
forthetransportposition.Thetransportlockisusedwiththe
deck-liftpedal.RefertoFigure24.
23