Toro 74991 Z Master Professional 5000 Series - Adjusting the Height of Cut

DrivingBackward
1.Movetheleverstothecenter,unlockedposition.
2.Togobackward,slowlypullthemotion-controllevers
rearward(Figure25).
G008953
Figure25
ShuttingOfftheMachine
Toshutoffthemachine,movethemotion-controlleversto
neutralandthentotheNEUTRAL-LOCKposition,disengage
theblade-controlswitch(PTO),andturntheignitionkeyto
theOFFposition.
Settheparkingbrakewhenyouleavethemachine;referto
SettingtheParkingBrake(page19).Removethekeyfrom
theignitionswitch.
CAUTION
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemachinewhileitis
unattended.
Alwaysremovetheignitionkeyandsettheparking
brakewhenleavingthemachineunattended,even
ifjustforafewminutes.
AdjustingtheHeightofCut
UsingtheTransportLock
Thetransportlockhas2positions,andisusedwiththe
deck-liftpedal.ThereisaLOCKpositionandanUNLOCK
positionforthetransportpositionofthemowerdeck(Figure
26).
Figure26
Transport-LockPositions
1.Transportlock3.UNLOCKposition—The
mowerdeckdoesnotlock
intothetransportposition.
2.LOCKposition—The
mowerdecklocksintothe
transportposition.
24