Toro 75969TE - Removing the Sheet-Metal Guard; Lubrication; Adding Light Oil or Spray Lubrication

RemovingtheSheet-Metal
Guard
Loosenthe2frontboltsandremovethesheet-metal
guardtoaccessthemowerbeltsandspindles
(Figure46).Afterperformingmaintenance,installthe
sheet-metalguardandtightenthebolts.
g027946
Figure46
1.Sheet-metalguard
2.Bolt
Lubrication
Greasemorefrequentlywhenoperatingconditions
areextremelydustyorsandy.
GreaseType:No.2general-purposelithium-based
ormolybdenum-basedgrease
1.Disengagetheblade-controlswitch(PTO),move
themotion-controlleverstotheNEUTRAL-LOCK
position,andengagetheparkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Cleanthegreasettingswitharag.
Note:Makesurethatyouscrapeanypaintoff
thefrontofthetting(s).
4.Connectagreaseguntothetting.
5.Pumpgreaseintothettingsuntilgreasebegins
tooozeoutofthebearings.
6.Wipeupanyexcessgrease.
AddingLightOilorSpray
Lubrication
ServiceInterval:Every100hours
Lubricatethedeck-liftpivots.
g017050
Figure47
40