Toro GrandStand 74574 - Page 41

3
g017848
Figure57
1.Leftcableadjustment
3.Rightcableadjustment
2.Cablelock
7.Checkforpropertracking.
Note:Ifthemachinewillnotstartafteradjusting
thetracking,makesureproximityswitchtargetaligns
withboltattachedtomotion-controllever;referto
AdjustingtheProximitySwitch(page41).
8.Repeatthecableadjustmentuntilthetrackingis
correct.
9.Checkthatthemachinedoesnotcreepfromneutral
withtheparkbrakesdisengaged.
Important:Donotrotatethelinkagetoofar,asthis
maycausethemachinetocreepinneutral.
AdjustingtheProximitySwitch
Usethisprocedureifthemachinewillnotstartafteradjusting
thetracking.
1.Ensurethattheboltattachedtothemotion-control
leveralignswiththeproximityswitchtarget(Figure58).
2.Ifneeded,loosentheboltsandadjusttheproximity
switchuntilthetargetalignswiththeboltattachedto
themotion-controllever(Figure58).
3.Checkthedistanceofthebolttotheproximityswitch;
itneedstobebetween0.51to1.02mm(0.02to0.04
inches)asshowninFigure58.
4.Ifadjustmentisneeded,loosenthejamnutandadjust
thebolttothecorrectdistance.
5.Tightenthejamnutafteradjustingthebolt(Figure58).
6.Testthesafety-interlocksystembeforeoperation.
G015609
1 6
2 3 4
4
2
5
6
Figure58
1.Proximityswitchtarget4.Boltattachedtothe
motion-controllever
2.Proximityswitch5.Distancebetween0.51
to1.02mm(0.02to0.04
inches)isneeded
3.Boltsandnuts6.Jamnut
41