Maintenance Safety
• Before you leave the operator’s position, do the following:
– Park the machine on a level surface.
– Disengage the cutting unit(s).
– Ensure that the traction is in neutral.
– Engage the parking brake.
– Shut off the machine and remove the key (if equipped).
– Wait for all movement to stop.
• Allow machine components to cool before performing maintenance.
• If possible, do not perform maintenance while the machine is running. Keep away from
moving parts.
• If the machine must be on to perform a maintenance adjustment, keep your hands, feet,
clothing, and any parts of the body away from the cutting unit, attachments, and any
moving parts. Keep bystanders away.
• Clean grass and debris from the cutting unit, drive, motor, and battery to help prevent
fires.
• Keep all parts in good working condition. Replace all worn, damaged, or missing parts
and decals. Keep all hardware tight to ensure that the machine is in safe working
condition.
• Check the grass catcher components frequently and replace them when necessary.
• To ensure safe, optimal performance of the machine, use only genuine Toro replacement
parts. Replacement parts made by other manufacturers could be dangerous, and such
use could void the product warranty.
• If major repairs are ever needed or if assistance is desired, contact an authorized Toro
distributor.
Recommended Maintenance Schedule
Maintenance
Service Interval
Maintenance Procedure Part No.
Qty Description
Before each use
or daily
Clean the machine. - - -
Every 750 hours Change the transmission fluid.
505-183 1
Dexron VI synthetic
transmission fluid (18.9 L or
5 US gallons)
Yearly Adjust the traction cable.
- - -
2
To Next Page
Loading...
