Pre-Maintenance Procedures
Preparing the Machine for Maintenance
WARNING
While you are maintaining or adjusting the machine, someone could start the
machine. Accidentally starting the machine could seriously injure you or other
bystanders.
Release the traction bail, engage the parking brake, remove the key, and disconnect
the battery before you do any maintenance.
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the machine.
4. Wait for all moving parts to stop before servicing, storing, or making repairs.
5. Disconnect the battery by pulling the T-handle connector
off of the main-power
connector
.
G404845
Electrical System Maintenance
Electrical System Safety
• Disconnect the battery before repairing the machine.
• Charge the battery in an open, well-ventilated area, away from sparks and flames.
Unplug the charger before connecting or disconnecting the battery. Wear protective
clothing and use insulated tools.
4
To Next Page
Loading...
