Toro Greensmaster Flex 1018 - Page 176

InstallingtheIdlerAssembly(continued)
C.Installthebearingshieldswithockedsideofshieldtowardthebearing.
D.Checktheidlerarmorientation(leftorrightcuttingunit)andinsertthe
stubshaft(item10inFigure94)throughshieldsandbearing.Usethe
throughholeintheshafttopreventshaftfromrotating,tightentheange
nutto37to45N∙m(27to33ft-lb).
E.Ifthecollarwasremovedfromtheidlerarm,installthecollarandtighten
to33to41N∙m(24to30ft-lb).
2.FitanewO-ringtothemotoradapter.
3.Applyanti-seizelubricanttotheoutsidediameterofthemotoradapterand
positiontheidlerarmovertheadapter.
4.Usenewlocknutsandsecurethemotoradapterandidlerarmtothecutting
unitsideplate.
5.Installtheclevispinandanewcotterpintosecuretheheightadjustmentrod
tothefrontoftheidlerarm.
6.Installthereeldrive;refertoInstallingtheReelAssembly(page8–18).
UniversalGroomer(Optional):ServiceandRepairs
Page9–14
Greensmaster
®
Flex1018/1021
20247SLRevA