Toro Greensmaster Flex 1018 - The Height Adjuster Assembly

TheHeightAdjusterAssembly
g251107
Figure98
1.Heightadjusterknob
6.Washer(2each)11.Quickuplever
2.Carriagebolt7.Compressionspring12.Quickupcover
3.Height-of-cutbracket
8.Flangenut13.Detentspring
4.Flangenut9.Heightadjustmentrod
14.Button-headscrew
5.Groomerhose10.Groomerpin
15.Heightadjustmentbolt
Note:Earlyuniversalgroomersused2compressionspringsonnon-adjustable
heightadjustmentrods.Retrottingtheassembliesoneachsideofthecutting
unitwithnewcompressionsprings,heightadjustmentrods,andaddingange
nutstoenablespringadjustmentisrecommended.
DisassemblingtheHeightAdjuster
1.Parkthemachineonacleanandlevelsurface,lowerthecuttingunits
completelytotheground,settheparkingbrake,andremovethekeyfromthe
keyswitch.
2.Removethecotterpinsandclevispinsthatsecuretheheightadjustment
rodstothegroomergearboxandidlerarm.Discardthecotterpins.
3.Loosenthe2heightadjustmentboltsand2locknuts.
4.Removetheangenut(item4inFigure98)andcarriageboltthatsecurethe
heightadjusterassemblytothecuttingunitsideplate,andremovethefront
rollerandheightadjusterfromthecuttingunit.
5.Disassembletheheightadjusterassemblyasnecessary.
6.Cleanallthecomponentsandinspectforwearordamage.Replaceallthe
componentsthatarewornordamaged.
UniversalGroomer(Optional):ServiceandRepairs
Page9–18
Greensmaster
®
Flex1018/1021
20247SLRevA