Toro Greensmaster Flex 1018 - Page 60

RemovingtheReelDriveBelt(continued)
5.Removethereeldrivebelt(2)fromthepulleys.
InstallingtheReelDriveBelt
1.Ensurethatthecarriagebolt(4)islooseenoughtomovetheidlerarm(3)
freely.
2.Placethenewdrivebelt(2)ontothepulleys.
3.Adjustthereelbelttension;refertoAdjustingtheReelDriveBelt(page5–3).
4.Ensurethatthereeldrivegasket(5)isinpositionandinstallthereeldrive
cover(6)tothereeldriveassembly(1)andsecurewiththe4sockethead
screws(7).
5.Torquetightenthesocketheadscrewsto1.7to4.5N∙m(15to40in-lb).
Useanalternationpatternandtorquetightenthesocketheadscrewsto9.6
to10.7N∙m(85to95in-lb).
6.Attachthesparkplugwiretothesparkplug.
TractionandReelDriveSystems:ServiceandRepairs
Page5–6
Greensmaster
®
Flex1018/1021
20247SLRevA