Q
qblakeAug 19, 2025
Why is the hydraulic system on my Toro Lawn Mower operating hot?
- AAndrea MayerAug 19, 2025
If the hydraulic system in your Toro Lawn Mower is operating hot, it could be due to several reasons. High transmission pressure from load or brakes, low oil level or a clogged inlet filter, contaminated oil, a damaged or plugged oil cooler, a stuck by-pass relief, a defective hydrostat by-pass valve, low charge pressure, or worn motors. You should reduce the load, ensure brakes are released, refill the oil reservoir, clean/replace the inlet filter, change the oil, inspect and repair/replace the oil cooler, check and free the by-pass relief, inspect and repair/replace the hydrostat by-pass valve, check and adjust charge pressure and inspect/replace worn motors.