Toro Groundsmaster 4300-D - Setup - Part 1; Installing Decals (CE Machines); Adjusting Control Arm Position

1
InstallingtheDecals(CE
MachinesOnly)
Partsneededforthisprocedure:
1Warningdecal
1
CEdecal
Procedure
•OnmachinesrequiringCEcompliance,installthe
warningdecalincludedintheloosepartsoverthe
existingdecal(Figure3).
•InstalltheCEdecalnexttotheserialnumberplate
onthemachine(Figure3).
g276200
Figure3
1.Warningdecal
2.CEdecal
2
AdjustingtheControlArm
Position
NoPartsRequired
Procedure
Youcanadjustthecontrolarmpositionforyour
comfort.
1.Loosenthe2boltssecuringthecontrolarmto
theretainingbracket(Figure4).
g031681
Figure4
1.Controlarm3.Bolts(2)
2.Retainingbrackets
2.Rotatethecontrolarmtothedesiredposition
andtightenthe2bolts.
11