Toro Groundsmaster 4300-D - Pre-Maintenance Procedures; Raising the Machine; Greasing Bearings and Bushings

Pre-Maintenance
Procedures
RaisingtheMachine
Usethefollowingaspointstojackupthemachine:
•Frontofthemachine—rectangularpad,under
theaxletube,insideeachfronttire(Figure64).
g031850
Figure64
1.Frontjackingpoint
•Rearofthemachine—rectangularaxletubeon
therearaxle.
Lubrication
GreasingtheBearingsand
Bushings
Ifyouoperatethemachineundernormalconditions,
useNo.2lithiumgreasetolubricateallbearings
andbushingsatthespeciedmaintenanceinterval.
Lubricatebearingsandbushingsimmediatelyafter
everywashing,regardlessoftheintervallisted.
Thegreasettinglocationsandquantitiesareas
follows:
•PumpdriveshaftU-joint(3)—Figure65
g003962
Figure65
•Cuttingunitlift-armcylinders(2each)—Figure66
g011612
Figure66
•Lift-armpivots(1each)—Figure66
53