Toro Groundsmaster 4300-D - Setup - Part 6; Adjusting Machine Software; Preparing the Machine for Operation

9
AdjustingtheMachine
Software
NoPartsRequired
Procedure
ContactyourauthorizedT orodistributortosetthe
machinesoftwaretotheCEmode.
10
PreparingtheMachine
NoPartsRequired
CheckingtheTirePressure
Checkthetirepressurebeforeuse;refertoChecking
theTirePressure(page28).
Important:Maintainpressureinalltiresto
ensureagoodquality-of-cutandpropermachine
performance.Donotunderinatethetires.
CheckingtheFluidLevels
1.Checktheengine-oillevelbeforestartingthe
engine;refertoCheckingtheEngine-OilLevel
(page56).
2.Checkthehydraulic-uidlevelbeforestarting
theengine;refertoCheckingtheHydraulic-Fluid
Level(page66).
3.Checkthecoolingsystembeforestartingthe
engine;refertoCheckingtheCoolingSystem
(page63).
GreasingtheMachine
Greasethemachinebeforeuse;refertoGreasingthe
BearingsandBushings(page53).Failuretoproperly
greasethemachineresultsinprematurefailureof
criticalparts.
16