Preparing the Lawn Before Using the Robotic
Mower
To prepare the lawn before using the robotic mower, do the following:
• Clear any obstructions and/or debris from your lawn.
• For best results when training the mower, first use a walk-power mower to mow the
lawn to a height of 51 mm (2 inches).
• Fill in any holes in the lawn that could stop the mower.
• To ease the setup process using the app, make a sketch of the mowing zone and all
obstacles, boundaries, transit paths, exclusion zones to make it easier to install the
charging station.
Turning on the Mower
G430078
1. To start setting up the mower, turn the power
switch from the O
FF to the ON position.
2. After the first startup, use the mobile app to
start the mower.
3448-238B Page 4–14 Setup: Preparing the Lawn Before Using the Robotic Mower
To Next Page