Toro LC1P65FC - Camshaft Lobe Specifications; Camshaft Journal OD

36
Camshaft Lobe Specifications
Standard
Service Limit
Intake
1.0905”
(27.7 mm)
1.0807”
(27.45 mm)
Exhaust
1.0937”
(27.78 mm)
1.0826”
(27.50 mm)
NOTE: If this measurement is out of specification, complete engine replacement is required.
The only internal parts available for this engine are gaskets and seals.
Camshaft Journal OD
Standard
Service Limit
0.5505”
(13.984 mm)
0.5478“
(13.916 mm)
Check the camshaft bearing journal for scoring, wear or damage.
NOTE: Verify that the decompression mechanism moves freely.
NOTE: If this measurement is out of specification, complete engine replacement is required.
The only internal parts available for this engine are gaskets and seals.