Toro Power Max 6000 - Filling the Fuel Tank; Mixing the Gasoline and Oil; Starting the Engine

Figure17
MixingtheGasolineandOil
Thissnowthrowerusesa50:1gasoline-to-oilmixture.
UseToro50:12-CycleOil(FuelStabilizerAdded)
oranequivalenthigh-grade,NMMATCW-certied
two-cycleoil.
Important:Topreventenginedamage,donotuse
automotiveoil(suchasSAE30or10W30)orfuel
mixedatthewronggasoline-to-oilratio.
1.PourahalfUSgallon(1.9liters)offresh,unleaded
gasolineintoanapprovedfuelcontainer.
2.Addtwo-cycleoiltothegasolineaccordingtothe
chartbelow(
Figure18):
Figure18
50:1Gasoline-to-OilRatioMixingChart
GasolineOil
1USgallon(3.8liters)2.6ounces(80ml)
2USgallons(7.6liters)5.2ounces(160ml)
3.Installthecaponthefuelcontainer.
4.Shakethecontainertomixthegasolineandoil
thoroughly.
5.Slowlyremovethecapandaddtheremaining
amountofgasoline.
Note:Donotmixgasolineandoilinthefueltank.
Oilatroomtemperaturemixeseasierandmore
thoroughlythancoldoil.Oilbelow32°F(0°C)
requiresadditionalmixing
FillingtheFuelTank
Fillthefueltankwithfreshfuelwiththeproper
gasoline-oilmixtureasshownin(Figure19).
Figure19
StartingtheEngine
1.InsertthekeyandturnitclockwisetotheOn
position(Figure20).
Figure20
2.Movethechokelevertotheright(Figure21).
12