EasyManua.ls Logo

Toro Power Max 6000 - Maintenance; Recommended Maintenance Schedule(s); Checking and Adjusting the Skids and Scraper

Toro Power Max 6000
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Aftertherst2hours
Inspectthetractioncableandadjustitifnecessary.
Checktheauger/impellercableandadjustitifnecessary.
Yearly
Checktheskidsandthescraperandadjustthemifnecessary.
Inspectthetractioncableandadjustorreplaceitifnecessary.
Checktheauger/impellercableandadjustitifnecessary.
Checktheaugergearboxoilandaddoilifnecessary.
Lubricatethehexshaft.
Inspectthesparkplug.Replaceand/orgapitifnecessary.
Yearlyorbeforestorage
Checktheairpressureinthetiresandinatethemto17–20psi(116–137kPa).
Drainthegasolineandruntheenginetodryoutthefueltankandthecarburetorat
theendoftheseason.
HaveanAuthorizedServiceDealerinspectandreplacethetractiondrivebeltand/or
theauger/impellerdrivebelt,ifnecessary.
Important:Youcanndmoreinformationaboutmaintainingandservicingyoursnowthrowerat
www.Toro.com.
PreparingforMaintenance
1.Movethesnowthrowertoalevelsurface.
2.Stoptheengineandwaitforallmovingpartstostop.
3.Removetheignitionkey.
4.Afterperformingthemaintenanceprocedure(s),
inserttheignitionkey.
CheckingandAdjustingthe
SkidsandScraper
ServiceInterval:Yearly—Checktheskidsandthe
scraperandadjustthemifnecessary.
Checktheskidsandthescrapertoensurethattheauger
doesnotcontactthepavedorgravelsurface.Adjustthe
skidsandthescraperasneededtocompensateforwear.
1.Checkthetirepressure.RefertoCheckingtheTire
Pressure.
2.Loosenthenutsthatsecurebothskidstothe
augersidesuntiltheskidsslideupanddowneasily
(
Figure32).
Figure32
3.Supportthesideplatessothattheyareatleast1/2
inch(1.3cm)abovealevelsurface.
Important:Theaugerbladesmustbe
supportedabovethegroundbytheskids.
4.Ensurethatthescraperis1/8inch(3mm)above
andparalleltoalevelsurface.
Note:Ifthepavementiscracked,rough,oruneven,
adjusttheskidstoraisethescraper.Forgravel
surfaces,adjusttheskidsfurtherdowntoprevent
thesnowthrowerfrompickinguprocks.
5.Movetheskidsdownuntiltheyareevenwiththe
ground.
6.Firmlytightenthenutsthatsecurebothskidstothe
augersides.
Note:Toquicklyadjusttheskidsiftheyloosen,
supportthescraper1/8inch(3mm)offthe
17

Related product manuals