Toro Power Max 6000 - Setup; Installing the Upper Handle

112-6623
1.Disengage
4.ReadtheOperator’s
Manual.
7.Keepawayfrommoving
parts,removethe
ignitionkeyandread
theinstructionsbefore
servicingorperforming
maintenance.
10.Engage
2.Wheeldrive5.Donotplaceyourhand
inthechute;stopthe
enginebeforeleavingthe
operator’sposition,usethe
tooltoclearthechute.
8.Disengage
3.Engage6.Thrownobjects,keep
bystandersasafedistance
fromthesnowthrower.
9.Augerdrive
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Handlebolts4
Curvedwashers
4
1.
Locknuts4
Installtheupperhandle.
2.
Nopartsrequired
–
Installthetractioncontrollinkage.
Carriagebolts
2
3.
Locknuts2
Installthechutecontrolrod.
4.
Nopartsrequired
–
Checkthetirepressure.
5.
Nopartsrequired
–
Checktheskidsandscraper.
6.
Nopartsrequired
–
Checktheoperationofthetractiondrive.
1.InstallingtheUpperHandle
4Handlebolts
4
Curvedwashers
4Locknuts
Procedure
Note:Donotremovetherubberbanduntilyouhave
installedtheupperhandle.
1.Liftandrotatetheupperhandleandpositionitover
thelowerhandle(Figure3).
Important:Routethecablesattachedtothe
QuickStickinsidetheupperhandlelegsand
ensurethatthecablesarenotpinchedbetween
thehandlesections.
7