Toro Power Max 6000 - Checking the Auger Gearbox Oil Level

3.Removethefastenersontherightbeltcover,
thenremovethecoverinthesequenceshownin
Figure37.
Figure37
4.Withtheauger/impellerleverdisengaged,ensure
thatthegapbetweentheaugerclutchassemblyand
thetabis1/16inch(1.5mm)(Figure38).
Figure38
1.Tab
5.Iftheauger/impellercableisnotproperlyadjusted,
dothefollowingsteps:
6.Loosenthejamnut(Figure39).
Figure39
1.Jamnut2.Turnbuckle
7.Loosenortightentheturnbucklethatadjuststhe
tensiononthecable(Figure39).
Note:Ensurethatthecabledoesnottwist.
8.Adjusttheturnbuckleuntilyouobtaintheproper
gap.
9.Tightenthejamnut.
10.Inserttheleftbeltcoverintoplace.
11.Inserttherightbeltcoverintoplace.
12.Securethefrontenginecovertotherearengine
coverusingthefastenerspreviouslyremoved.
13.Securetheleftandrightbeltcoversusingthe
fastenerspreviouslyremoved
14.Iftheauger/impellercableisproperlyadjustedbut
aproblemremains,contactanAuthorizedService
Dealer.
CheckingtheAugerGearbox
OilLevel
ServiceInterval:Yearly—Checktheaugergearboxoil
andaddoilifnecessary.
1.Movethesnowthrowertoalevelsurface.
2.Cleantheareaaroundthepipeplug(
Figure40).
19