Toro PowerPlex 40 V MAX - Unfolding the Handle

2
UnfoldingtheHandle
NoPartsRequired
Procedure
1.Unfoldthehandle(AofFigure2).
2.Pressandholdthelockingbuttonontheuppershaft,alignthelockingbuttonwiththeslottedholeonthe
lowershaft,andslidethe2shaftstogether.Oncetheslottedholeonthelowershaftispastthelocking
button,releasethelockingbutton,andslidethelowershaftintotheuppershaftuntilthetrimmeris
atthedesiredheight(BofFigure2).
Note:Usethelockingbuttononlyforassemblyanddisassembly.Youdonotneedtousethebuttonto
adjustthehandle.
3.Tightenthelowershaftconnectortosecurethehandleatthedesiredheight(CofFigure2).
g195351
Figure2
7