Setup
Important: The battery pack is not fully charged when it is purchased. Before using the machine for
the rst time, refer to Charging the Battery Pack ( page 16 ) .
1
Assembling the Grass Bag
No Parts Required
Procedure
g407949
Figure 3
2
Unfolding the Handle
No Parts Required
Procedure
Important: Remove and discard the protective plastic sheet that covers the motor and any other
plastic or wrapping on the machine.
W ARNING
Folding or unfolding the handle improperly can damage the cables, causing an unsafe
operating condition.
• Do not damage the cable(s) when folding or unfolding the handle.
• Ensure that the cable(s) are routed to the outside of the handle.
• If a cable is damaged, contact an Authorized Service Dealer .
Important: Hold the handle while engaging the handle locks to avoid pinching your hands.
1. Remove the handle knobs (A of Figure 4 ).
2. Using the holes at the ends of the handle, attach the handle to the machine (B of Figure 4 ).
3. Move the handle rearward to the operating position (C of Figure 4 ).
9
To Next Page
Loading...
Need help?
General
