Setup
Important: The battery pack is not fully charged
when it is purchased. Before using the machine
for the rst time, refer to Charging the Battery
Pack ( page 17 ) .
1
Mounting the Battery
Charger (Optional)
No Parts Required
Procedure
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the charger .
Mount it indoors (such as a garage or other dry place),
near a power outlet, and out of the reach of children.
Refer to Figure 3 for assistance in mounting the
charger .
Slide the charger over the appropriately positioned
hardware to secure the charger in place (hardware
not included).
g290534
Figure 3
8
To Next Page
Loading...
