2
Unfolding the Handle
No Parts Required
Procedure
W ARNING
Folding or unfolding the handle improperly can damage the cables, causing an unsafe
operating condition.
• Do not damage the cable(s) when folding or unfolding the handle.
• Ensure that the cable(s) are routed to the outside of the handle.
• If a cable is damaged, contact an Authorized Service Dealer .
Note: Ensure that the cables are routed on the outside of the handle and are not pinched (D of Figure 4 ).
g335466
Figure 4
9
To Next Page
Loading...
