Folding the Handle
W ARNING
Folding or unfolding the handle improperly can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or unfolding the handle.
• If a cable is damaged, contact an Authorized Service Dealer .
1. Hold the handle while disengaging the handle locks to avoid pinching your hands.
2. Disengage the handle locks until you can move the upper handle freely (A of Figure 14 ).
3. Fold the handle forward and engage the handle locks (B and C of Figure 14 ).
Important: Route the cables to the outside of the handle locks as you fold the handle.
g479651
Figure 14
4. T o unfold the handle, refer to 1 Unfolding the Handle ( page 5 ) .
15
To Next Page
Loading...
