Toro Recycler S55OST User Manual

g231390
Figure 22
Important: Position the curved ends of the
blade to point toward the machine housing.
6. Use a torque wrench to tighten the blade bolt
to 82 N∙m (60 ft-lb).
Adjusting the Self-Propel
Drive
For Self-Propel-Drive Models Only
Whenever you install a new self-propel cable or if
the self-propel drive is out of adjustment, adjust the
self-propel drive.
1. T urn the adjustment nut counterclockwise to
loosen the cable adjustment ( Figure 23 ).
g464573
Figure 23
1. Push the cable towards
the engine to increase the
traction.
4. Self-propel-drive cable
2. Pull the cable away from
the engine to decrease the
traction.
5. Handle (left side)
3. Adjustment nut
2. Adjust the tension on the cable ( Figure 23 ) by
pulling it back or pushing it forward and holding
that position.
Note: Push the cable toward the engine to
increase the traction; pull the cable away from
the engine to decrease the traction.
3. T urn the adjustment nut clockwise to tighten the
cable adjustment.
Note: T ighten the nut rmly with a socket or
wrench.
20

Toro Recycler S55OST Specifications

General

Brand	Toro
Model	Recycler S55OST
Category	Lawn Mower
Language	English