Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger . Replace any decal that is damaged or missing.
decaloemmarkt
Manufacturer's Mark
1. This mark indicates that the blade is identied as a part
from the original machine manufacturer .
decal133-8198
133-8198
1. W arning—read the Operator's Manual ; add fuel up to the
indicated level, then tip the machine onto the rear wheels
for storage.
decal1 12-8760
1 12-8760
1. Thrown object hazard—keep bystanders away .
2. Cutting/dismemberment hazard of hand or foot, mower
blade—stay away from moving parts.
decal131-4514
131-4514
1. W arning—read the Operator's Manual .
2. Cutting/dismemberment hazard of hand, mower
blade—stay away from moving parts; keep all guards and
shields in place.
3. Cutting/dismemberment hazard of hand, mower
blade—disconnect the spark-plug wire before performing
maintenance.
4. Thrown object hazard—keep bystanders away; shut of f the
engine before leaving the operating position; pick up any
debris before mowing.
5. Cutting/dismemberment hazard of foot, mower blade—do
not operate up and down slopes; operate side to side on
slopes; look behind you when moving in reverse.
4
To Next Page
Loading...
Need help?
General
